CAPTCHA
Image CAPTCHA
Enter the characters shown in the image.
This question is for testing whether or not you are human.
  • Create new account
  • Reset your password

User account menu

Home
The Hyperlogos
Read Everything

Main navigation

  • Home
  • My Resumé
  • blog
  • Howtos
  • Pages
  • Contact
  • Search

RAV4 3rd gen key replacement from valet key and master fob

Breadcrumb

  • Home
  • User Blogs
  • User Blog
  • RAV4 3rd gen key replacement from valet key and master fob

I recently got a pre-dented 2011 RAV4 AWD Base+Sunroof package. These vehicles have either a "smart key" (which I don't have) or the key has a keyless entry remote built into the head. I got the vehicle only with a valet key and just the key fob/head part of one master key, but I figured out how to parlay this into having a working master key again.

All 3rd generation and later (and probably earlier, but I don't know) RAV4s have an immobilizer, which is no surprise given the modernity. 2011 and 2013 vehicles use a key with a G code immobilizer chip. US vehicles use a 314 MHz remote transmitter... I think. Valet keys have a chip, but no fob, and they cannot be used to program new keys to the vehicle. The master key I had with no blade was still programmed to the car. Here is how this went:

First, I bought a key shell and blade for four bucks on Aliexpress. They dropped the price to $2.69 since, you want the model 3. 

I got the valet key copied at ACE Hardware. Their machine even figured out that the tip of the key should be bigger and corrected it. (Compare your normal and valet key if you don't know what I am talking about.) I held the old fob housing up next to the lock and used the newly cut key to start the vehicle, no problem. Then I broke apart the old fob key housing with a small screwdriver (one of the little ones you buy off the counter with the reversible shaft and a pocket clip) to get the chip out still encased in the potting material. I scraped this just a little bit and stuffed it into the new key, and transferred the transmitter over as well.

A locksmith quoted me $225 for one key, programmed to the vehicle. $3.95 for a cut and $4.01 for the key and I'm out less than $8. That's less than 1/28 the cost of going to the locksmith. I'm not sure what they charge at the hardware store to copy your key and fob. I don't know if they clone or program, either.

The next step is to get two more keys done so I can relax. I also got a key/fob programmer dongle for $18.78 and 2x 3 button G chip keys with 314 MHz transmitters for $10.65 each. I will report back once I am 100% sure this approach works. Using the programmer box does require opening and closing the door once but you don't have to do the full stupid shuffle that you normally have to do with correct timing in order to program new fobs, and it can program new immobilizer chips.

This process will not work with all keys lost, and you must have a G chip from a non-valet key and I think also a paired fob in order to be able to program more fobs. If you have anything less than that you will still need to go through a dealer or locksmith to get a new key cut from the code and both the chip and fob programmed to the car. But as long as you can get one proper key then the dongle will let you program more new non-cloned chips.

Finally: the dongle does not work with the smartass key.

RAV4
key
  • Log in or register to post comments

RAV4 3rd gen key replacement from valet key and master fob

Powered by Drupal

Copyright © 2026 Martin Espinoza - All rights reserved